- USB output
- ABS structure
- Display OLED 128×64 mm
- 14 roughness parameters
- Interchangeable inductive probe
- Standard ISO – DIN – ANSI – JIS
- Cut off 0,25 – 0,8 – 2,5mm
- Range: Ra 0,005-16,000 micron Rz 0,02-160,00 micron
- Accuracy 0,001 micron
- Memory up to 100 measurements
- Rechargeable battery
- Display of roughness value, profile and graphic
- Supplied with standard probe 90°, calibration stand. sample, USB cable and software
- On request probes and extensions for special applications
Category: Coating thickness gauges, roughness testers, hardness testers Sermac
Portable.
Coating thickness gauge – Cod. S-KCT300
- Light and compact structure
- Accuracy +/-2%T+1 micron (T=measured thickness)
- LCD screen 128x64mm
- Range 0 – 1.250 micron
- In option, 0 – 10.000 micron with probe F10
- Supplied with probe F1 measuring non ferrous coatings on ferrous materials
- Resolution 0,1 micron
- Memory 500 measurements
- Supplied with probe F1 and calibration set
Portable hardness tester – Cod. S-KH530
- Display 320x240mm
- It can be used in each direction
- Ultra light structure
- Integrated printer
- Interchangeable probe
- Min. thickness with standard probe D type, 5mm
- Hardness scale HL, HB, HRB, HRC, HRA, HV, HS
- Rechargeable battery
- Memory 600 measurements
- Display with double scale
- Error +/-6 HLD (with probe D type)
- USB output
- Range: HLD 170-960, HRC 17,9-69,5, HB 19-683, HV 80-1042, HS 30,6-102,6, HRA 59,1-88, HRB 13,5-101,7
- Supplied with probe D type, sample ring, brush, USB cable and software
Ultrasonic thickness gauge – Cod. S-KT320
- Perfect to measure metal and non metallic alloys
- Range 0-75 – 300mm
- Range 1,2 – 230mm with prober N05
- Supplied with probe N05, area 20x3mm
- USB output
- Memory 500 measurements
- Resolution 0,01mm up to 100mm – 0,1mm over 100mm
- Supplied with probe N05, sample, USB cable and software
Touch screen rockwell hardness tester – Cod. S-DTHROCK
- Colour touch scren display 5,2″
- Manual loading
- Motorized control force
- Memory up to 2.000 groups
- Resolution 0,1 HR
- Self-conversion in different scale (HV, HK, HBS, HS, HK, HBW, HR15N, HR45N, HR15T..)
- Hardness cale HRA, HRB, HRC, HRD. HRE, HRF, HRG, HRH, HRK, HRL, HRM, HRP, HRR, HRS, HRV
- Total load force: 60kgf (588,4N) – 100kgf (980,7N) – 150kgf (1.471N)
- Time 1-60s
- Maximum piece height 175mm
- Dimension546x182x755mm
- Standard EN-ISO 6508- ASTM E-18 – JJS Z2245 – GB/T230.2
- Supplied with:
- 1 indenter 120°
- 1 indenter 1/16″
- 3 hardness test HRB, HRC 58-65, HRC (28-33)
- 2 flat anvils (small and big)
- 1 V anvil and set of weights