- Quick measurement with lever
- Resolution: 0,001mm/0.00005″
- IP65 protection level
- Button: on/off, mm/inch, origin, ABS/zero
- Automatic power off
- Data output (cable code: 100-13)
- Carbide measuring faces
- Setting standards are included (except 314-001-02)
Category: Micrometers Accud
Digital, outside, inside, three points, disk, thread.
Digital outside micrometer IP65 Accud – Cod. 313-000-02
- Resolution: 0,01mm/0.00005″
- IP65 protection level
- Button: on/off, mm/inch, zero
- Automatic power off
- Data output (cable code: 300-01)
- Carbide measuring faces
- Ratchet stop
- Setting standards are included (except 313-001-02)
Digital outside micrometer Accud – Cod. 312-000-02
- Resolution: 0,01mm/0.00005″
- Button: on/off/set, mm/inch, ABS
- Carbide measuring faces
- Ratchet stop
- Setting standards are included (except 312-001-02)
Outside micrometer Accud – Cod. 321-000-01
- Graduation: 0,01mm
- Carbide measuring faces
- Ratchet stop
- Setting standards are included ( except 321-001-01)
Outside micrometer set Accud – Cod. 321-000-set
- Consist of series 321 individual micrometer
Micro graduation outside micrometer Accud – Cod. 322-000-01
- Graduation: 0,001mm
- Carbide measuring faces
- Ratchet stop
- Setting standards are included (except 322-001-01)
Outside micrometer with interchangeable anvils Accud – Cod. 325-000-01/02
- Graduation: 0,01mm
- Ratchet stop
- Carbide measuring faces
- Supplied with setting standards
Outside micrometer with extension anvils Accud – Cod. 329-000-01
- Adjust collars for different measuring ranges
- Graduation 0,01mm
- Ratchet stop
- Carbide measuring faces
- Supplied with setting standards
Digital blade micrometer Accud – Cod. 316-000-03
- Measure the groove diameter of shafts and keyways
- Quick measurement with lever
- Resolution: 0,001mm/0.00005″
- IP65 protection level
- Button: on/off, mm/inch, origin, ABS/zero
- Automatic power off
- Data output (cable code: 100-13)
- Carbide measuring faces
- Setting standards are included
Digital point micrometer Accud – Cod. 317-000-03
- Measure the web thickness of drills, small grooves and keyways
- Resolution: 0,001mm/0.00005″
- Button: on/off/set, mm/inch, ABS
- Automatic power off
- Setting standards are included (except 317-001-03)