Skip to content
- Measure the grooves
- Made of stainless steel
- Satin chrome plated reading surface
PRODUCT INFO“Inside point vernier caliper Accud – Cod. 146-000-11/13”
- Measure the wall thickness
- Resolution: 0,01mm/0.0005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code: 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital tube thickness caliper Accud – Cod. 137-006-11”
- Measure small holes or grooves
- Resolution: 0,01mm/0.0005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code: 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital point caliper Accud – Cod. 138-006-11”
- Measure the diameter of deep holes or grooves
- Resolution: 0,01mm/0.0005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code: 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital inside knife-edge caliper Accud – Cod. 139-006-11”
- Measure small grooves
- Resolution: 0.01mm/0.0005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code: 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital blade caliper Accud – Cod. 153-000-11”
- Risoluzione 0,01mm
- Uscita dati
- Struttura in plastica rinforzata
PRODUCT INFO“Plastic digital caliper Accud – Cod. 117-000-11”
- Resolution: 0,01mm/0.005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital depth caliper Accud – Cod. 171-000-11”
- Measure the depth of small holes or grooves
- Resolution: 0,01mm/0.0005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code: 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital pin depth caliper Accud – Cod. 172-008-11”
- Measure the depth of grooves, small holes and tire thread
- Resolution: 0,01mm/0.0005″
- Automatic power on/off
- Buttons: on/off, zero, mm/inch
- Data output (cable code: 100-11 or 100-12)
- Made of stainless steel
PRODUCT INFO“Digital depth caliper Accud – Cod. 176-001-11”
- Measure the depth of grooves, small holes and tire thread
- Graduation: 0,1mm
- Made of stainless steel
PRODUCT INFO“Vernier depth caliper Accud – Cod. 176-030-12”